>>>Ampeg Scrambler<<< 

Quantity	 Decription		Mouser Part Number (other other supplier) 

Resistors  
Resistor part numbers are for 1%, 1/4-watt metal film resistors  
1 - 470K, 271-470K  
2 - 220K, 271-220K  
2 - 47K, 271-47K  
1 - 8K2, 271-8.2K  
3 - 4K7, 271-4.7K  
1 - 1K, 271-1K  
1 - 220, 271-220
  
Potentiometers  
1 - 50K linear taper pot (16mm), 313-1000-50K  
1 - 10K linear taper pot (16mm), 313-1000-10K 
 
Capacitors  
1 - 100µF electrolytic, 140-XRL25V100  
3 - 4.7µF electrolytic, 140-XRL25V4.7  
2 - 1µF electrolytic, 140-XRL25V1.0  
1 - 0.01µF polyester film, 140-PM2A103K 
 
Transistors  
3 - 2N5306 darlington, 610-2N5306  
1 - 2N5089, 610-2N5089  

Diodes  
5 - 1N456 Silicon, Small Bear Electronics (www.smallbearelec.com)  
1 - Red super-bright LED, Water clear lens, 351-5100  

Other Parts
1 - Hammond 1590BB Aluminum Enclosure, 546-1590BB  
1 - Switchcraft enclosed stereo input jack, 502-N112B  
1 - Switchcraft enclosed mono output jack, 502-111  
1 - 3PDT Stomp Switch, Aron Nelson (http://www.diystompboxes.com/cart/)  
1 - DC Power Jack with N/C Switch, Plastic body, 163-4302  
1 - 24 gauge white stranded hook-up wire, 100 foot spool (many effects!), 602-3050-100-01 
2 - Black plastic knobs, 1.13" dia., 5164-1500  
1 - Solderless LED Connector (built-in 2K2 resistor), 593-CNX310220  
1 - LED mounting clip, 2-piece, 351-0002 
1 - Battery snap, 6" leads, 123-5116
4 - 3M stick-on rubber feet, black, 517-SJ-5012BK 

Copyright © 2004 by Phillip Bryant.  All rights Reserved.